GEPRC has announced its new CineLog20 drone – a small lightweight 2″ FPV drone with a DJI O3 Air Unit that is suitable for indoor flying.

Summary
For the needs of shooting complex indoor environments, GEPRC recently released the 2-inch Cinewhoop CineLog20. Available in Link Wasp, O3 AIR Unit, Walksnail and Analog four mainstream video transmission system on the market.

CineLog20 continues the CineLog series with a lightweight push design, and the redesigned camera vibration reduction solution provides an excellent mounting platform for shooting with the O3 AIR Unit, which can achieve excellent anti-shake effect. The O3 AIR Unit version can shoot 4K 60fps video without mounting any camera. It's lighter and has a longer battery life.

It uses GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, the reasonable and efficient power system makes the CineLog20 very quiet and with a long battery life, making flying and shooting safer. With the help of the one-piece camera stand, you can quickly mount GEPRC Naked cameras GoPro 8/9/10/11, Action2, insta360 Go2, Peanut, as well as other light and small action cameras.

Feature
Designed to install a damping pad under the independent FPV camera to reduce the image jelly effect of the FPV goggles, with good anti-shake effect.

Provides the basic versions of Link Wasp, O3 AIR Unit and Walksnail HD video transmission, Bind-N-Fly to save you the hassle of building and setting up.

2-inch pusher design (Pusher where the motors with are facing down), small size and light, more suitable for complex and narrow environments, shooting in linear flight.

SPEEDX2 1303.5 5500KV motor with Emax four-blade props make video recording easy in flight.

Reusing the vibration suppression structure of the CineLog series, which can effectively eliminate the "jelly" in the image caused by the body when flying with a "Naked" Naked GoPro mounted.

The fine tuning by the GEPRC team and the overall flight feel is delicate and supple.

Specifications:

  • Model: CineLog20 HD O3
  • Frame: GEP-CL20
  • Wheelbase: 100 mm
  • Gimbal plate: 2.0 mm
  • Top plate: 2.5mm
  • Bottom plate: 1.5 mm
  • FC system: GEP-F411-35A AIO
  • MCU: STM32F411CEU6
  • Gyroscope: ICM 42688-P
  • OSD: Betaflight OSD with AT7456E chip
  • ESC: 8 bits 35A
  • VTX: O3 AIR module
  • Camera: O3 camera
  • Antenna: 5.8G&2.4G
  • Motor: GR1303.5 5500KV
  • Propeller: EMAX Avan Micro 2×2.4×4
  • CineLog20 HD O3 TBSNanoRX weight: 140g
  • Receiver: PNP (built-in DJI receiver), ELRS2.4G, TBS Nano RX / RXSR
  • Recommended battery: LiHv 4S 450mah-660mah
  • Flight time: 4-6 min

Package included:

  • 1 x CineLog20 HD O3
  • 2 x 2 inch fins (pairs)
  • 1 x bare GoPro base
  • 2 x M15*150mm battery strap
  • 2 x Silicone battery pads
  • 2 x EVA landing pads
  • 1 x Set of screws
  • 1 x L-shaped screwdriver (1.5 mm)
  • 1 x Fixed antenna tube
  • 1 x 4S Naked GoPro Power Cable (with balanced terminal head)
  • 2 x EVA shock absorber rings
  • 1 x TBS antenna stand (vertical type)
  • 1 x TBS antenna stand (horizontal type)
  • 1 x TBS antenna printed parts

The screw package includes:

  • 3 x M2*12mm socket head screws
  • 2 x M2*5mm round head screws
  • 1 x M2*8mm round head screw with washer
  • 3 x M2*7mm round head screws
  • 2 x M2*8mm round head screws
  • 2 x M2 iron nuts
  • 1 x self-tightening nut

Link to the product information on the manufacturer's website: geprc-cinelog20-hd-o3-fpv-drone