Driven by advice gathering and product trends for most pilots on the market for some time, CaddxFPV are now happy to announce some new enhancements to our Avatar product line.

Avatar HD Pro Camera:

  1. Adopts 1/1.8 inch sony starvis sensor, the night vision effect is as good as the day;
  2. Support 1080P, the first high-frame night vision HD camera in the market;
  3. Support Gyroflow for better image stabilization.

Specifications  
Camera  
Model Avatar HD pro camera
Image Sensor 1/1.8-Inch Sony Starvis Ⅱ sensor
Resolution 1080P/60fps;720P/100fps,720P/60fps;1080P/120fps compatibility;
Ratio 16/9; 4/3
Lens 8Mp
FOV 160°
Aperture F1.6
Shutter Rolling shutter
Min.Illumination 0.00001Lux
Weight 9.5g
Dimensions 19*19*24mm
Coaxial Cable 140mm
Gyroflow supported
Packing List  
M2*4mm screws x4
M2*5mm screws x4
M2*6mm screws x4
M2*5*0.5mm gasket x4

In a new video KremerFPV uploaded a video showing the difference in night vision between the Avatar Pro and the Insta360 Go2:

 

Avatar HD V2 Camera:

  1. Upgraded to 2K pixel, 4:3 native sensor for better image quality and native 4:3 mode image ratio.
  2. Supporting Gyroflow. (For 32g only)

Avatar HD VTX:

  1. Added 20*20mm mounting holes, now there are two options for assembly;
  2. Improved internal circuit and shell, more durable;
  3. Add spare pads and provide two power connection methods;
  4. Optimize the design of the antenna base and the position of the frequency button, which is more convenient;
  5. Add 8/32g built-in storage option. Enough storage space is available.

Key specifications:

  • 1080P 120fps compatibility
  • High frame starlight
  • 22ms low latency
  • Ranging Mode
  • 4km range
  • Light weight design
  • FOV160°
  • Built-in 32G storage
  • 6V-25.2V
  • Sony Starvis Ⅱ Technology

The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency. Support 1080P/60FPS, 720P/120FPS.
Featuring a 1/1.8 inch Sony Starvis Ⅱ sensor, this camera delivers excellent night vision that's just as clear as day.
The camera ( 32G VTX KIT) supports Gyroflow, take you smooth and stable video quality.

In addition to the original 25mm x 25mm mounting holes, the kit now includes 20mm x 20mm holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes. 

New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to25.2V, our VTX delivers unmatched stability and resistance to GPS interference. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.

The Avatar VTX comes with 8g/32g built-in storage it can record 1080p or 720p HD flight videos without interference.32G built-in storage, recording video time increased by 4 times. 

It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.